Construction Chemicals Corporation

M/s Choksey Chemicals Pvt.Ltd. Make Fibre Reinforced Acrylic Waterproof coating for Roof which is open to Sky.

Dr. Fixit Self Adhesive 1.5mm is bitumen modified with elastomeric based on astatic polypropylene, isotactic polypropylene, synthetic rubber and stabilizing aggregate fillers. It is UV rays resistant and Excellence adhesion to primed concrete substrates

Single component ,Elastomeric Bituminous Acrlylic Liquid Membrane

MYK Arment - 2 Component, PU
Injection Grout for Waterproofing of Basement / Lift Pit / Water Tank / Podium Slab

Roofs & Terraces ,Podium ,Retaining Walls ,Bathroom undeer tiles ,
swimming Pool & Tunnels.

MARISEAL® 250 is a premium, liquid-applied, highly permanent elastic polyurethane membrane used for long-lasting waterproofing.Based on pure elastomeric hydrophobic polyurethane resins, which result in excellent mechanical, chemical, thermal, UV and natural element resistance properties.

Super ThermoLay APP PL is uniquely formulated pre-fabricated plastomeric waterproofing membrane with spun bonded polyester mat as a core. Super ThermoLay APP PL has an excellent resistance to weather and ageing. The core of 160 Grms non woven polyester mat offers an excellent tensile strength, elongation and a superior lap joint strength. The polymer modification of bitumen with AtacticPolypropylene (APP) results an excellent resistance to hot and cold temperatures.Use of Super ThermoLay APP PL forms an impervious, flexible waterproofing layer which canwithstand normal movement of structure without showing any deteoriation and serve for a prolongedperiod of time.SuperThermoLay APP MT is coated with mineral / natural gray slate on one side with other sideremaining covered with thermo-fusible polyethylene film.SuperThermoLay APP PL / MT is normally used in protected roofing and waterproofing applications in a single layer system and is also recommended as base layer in multilayer system in various applications, Including damp-proofing.

ShaliHDPE® SA is a multi-layer compound waterproofing membrane, composed of a layer of high-density polyethylene (HDPE) film, polymer press-sensitive adhesive layer and unique technology reactive inorganic fine granule or silicon-oiled release film layer, specially designed for underground basement structure waterproofing, and suit for pre-applied construction method. This waterproofing membrane with cast-in-place concrete by chemical cross-linking to achieve high strength bonding can completely prevent moisture penetration and leaking, without basal displacement effects.

HYDROSTOP 3PY-P is APP Polymer Modified Bituminous Waterproofing Membrane Sheet of 3mm Thickness.Composed of Non-Woven Polyester Mat as Core Reinforcing Media suitably finished with Thermo Fusible Polyethylene Film on top and bottom side of sheet.

A high density mass loaded sound barrrier sheet for low frequency acoustic insulation for walls, ceiling and floors with 2mm, 4mm and 6mm thickness variants.

 

• Solution: Acoustic Insulation
  
  Application:

  • Used to absorb and reduce mechanical vibrations thereby dampening the noise.
  • Used as substitute for lead sheets in between plaster boards, woodenboards, metallic sheets and porous insulating materials.
  • Used for increasing the overall insulation efficiency of other insulating materials (fibres, rock wool etc.) at low frequencies.
  • Membrana Acústica Danosa M.A.D.2 is a mass loaded high-density membrane specifically
  • designed to behave as an anti resonant material.
  • It is an efficient substitute for lead sheets. Between porous absorbers materials works like a panel
  • absorbers (most efficient at absorbing low frequencies).

  Felt size: 1 m x 12 m, 1m x 6 m, 1 m x 6 m, 1 m x 4.5 m

TarFelt® LM is water based, cold applied, single component, elastomeric in-situ seamless monolithic coating. This unique system is ready to use acrylic modified bituminous liquid membrane.

ShaliHDPE SA 
Size - 2 M x 20 M x 1.2 mm Thk.
(1 Roll of 40 Sq.M.)

SikaProof®-312 IN HDPE is a unique HDPE based selfadhesivemembrane fully bonded sheet membranecomprising of a virgin HDPE layer, coated with a highbond strength adhesive, and covered with a releaseliner, for below ground waterproofing of reinforcedconcrete structures. It is loose laid onto prepared substratesor formwork before fixing reinforcement andcasting concrete. The adhesive layer is activated whenthe concrete is poured on the surface and forms a permanentbond with the fresh concrete which will preventthe ingress of water around the structure. Reinforcementcan be directly laid on top of the membraneand it does not require screed protection.

SealArm Water bar RS 800 is a well-developed joiningstrip which is very economic and safe to use, compared tousual joint sealing methods (PVC-joint tape, joint sheetsetc.). It is used for the waterproofing of construction jointsbeing subject to ground-, slope- and surface water,permanently or only temporarily.

ShaliUrethane® LHM is single component, solvent based, high tensile, moisture cured, modifiedPolyurethane elastomeric, hydrophobic, liquid membrane for waterproofing with high elongation.When applied, it forms a seamless monolithic membrane by reaction with atmospheric moisture.

STP Super ThermoLay SBS Membrane

Sika WP Shield