Construction Chemicals Corporation

SPLASHis a clear single component, water b ased free flowing l iquid developed specially forwaterproofing of very difficult areas, where in other waterproofing systems cannot beimplemented. SPLASH is a ready to use material available in white turbid color, which penetratesin to the pores. It dries to a clear and tough film which gives high quality waterproofing

M/s MYK Arment PU Based waterproof coating for Terrace/Podium

Choksey Make -
HIGH BUILD ELASTOMERIC BITUMINOUS POLYURETHANE BASED WATERPROOFING MEMBRANE

Birla Opus Prime B90 Ultra Luxury Waterproof Coating is a specialized waterproofing formulation comprising of tough acrylic and PU hybrid polymers.
The incorporation of a unique elastomeric structure, comnbined with acrylic fibres, enhances the film's strength and provides cooler exterior surfaces.

Two component Cementitious Acrylic Polymer Waterproof Coating for Toilets / Dry Balcony / Terrace 

M/s MYK Arment Pvt Ltd. Crysalline waterproof coating for lift shafts ,retaining wall,foundations , as well as for WaterTanks

ReArm Micro Concrete is ready to use single component dry powder cementitious material. It is supplied as a pre blendedpolymer modified dry powder the addition of recommended water at the site to produce non-shrink free flowing high strengthmicro concrete. This is specially designed for repair to damaged reinforced concrete. It is suitable for use in wide range ofrepairs, pavements, ramps etc.

It is a WaterBorn ,single component ,fibre-reinforced, elastomeric liquid-applied membrane based on pure acrylic chemistry. Once cured, it will form a thick, seamless, durable, elastomeric membrane, offering long-lasting waterproofing performance.

Single Component, Waterproof, Elastomeric, UV Stable,Water based Acrlylic coating for Waterproofing of Terrace / Roof / Parapet Wall / Chajja / Roof Sheets. 
Color stainer can be mixed to make different color shades

Single component Acrylic based Water tightening &bonding agent.

It is acrylic polymer based, used as a cement modifier when applied, provides good bond with masonry/ cement and thus,improves the tensile and flexural strength properties of the mortar

MYK Arment make SBR Latex Chemical for Bond coat, RCC Repairs, Crack Filling, Minor Waterproofing works

Latex acrylic polymer based cement modifiercum bonding aid with waterproofing property

Advantages :
1) Good adhesion
2) Increased strength
3)User friendly

Nitobond AR Std. is a single component latex acyrlic polymeremulsion used as bonding aid cum cement modifier withwaterproofing property.

AquaArm WPU 1K E is a single-component, liquid applied, elastomeric polyurethane coating for waterproofing ofconcrete surfaces. AquaArm WPU 1K E provides excellent resistance to moisture, water, and salts penetration intoconcrete and masonry surfaces

ESSRBOND WPK45 Liquid Applied Waterproof Membrane made of Hybrid polymer specially designed for waterproofing. Its outstanding performances allow protection and waterproofing of many areas such as: 
 Water supply channel  Water storage tanks  Flowerbeds and fountains  Rooftops  Crack bridging  Under-tile wet areas (pools, bathrooms, balconies, terraces…) 

ESSRBOND WPK 55 is a hybrid-polymer based, one component liquid applied, solvent free waterproofing coating. It is UV resistance, crack bridging property coating material that can be applied even to damp surfaces, without primer. When applied, ESSRBOND WPK 55 creates a continuous watertight seal. It has also excellent adhesion to almost all surface like concrete, metal, wood, ceramic, granite etc. . ESSRBOND WPK 55 maintains its properties with a service temperature from -40 ℃ to + 100 ℃. ESSRBOND WPK 55 is applicable by brush, roller or spray gun.

BITUMAT SYNROOF HI-BUILD, an elastomeric, premium quality acrylic coating, may be applied by brush, roller, squeegee or spray equipment depending on site conditions. To spray, select a nozzle size of at least 0.028 in; first checking the spray equipment to ensure suitability. All surfaces to be coated must be clean, dry, free from dust, dirt, oil and other contaminants. Coverage varies depending on factors such as type and quality of substrates i.e. surface regularity and application method. Apply in separate coats, each at a right angle to the one before. Using a different colour for each coat helps ensure consistency of cover. The final coating thickness to be achieved depends on the requirements of the individual roof. A final dry film thickness between 0.5 and 1.5 mm may be built-up.

M/s Choksey Make Pour Grade Polysulphide Sealant for Horizontal surface
Name- Techseal RDL 911

RDL 9 1 1 (Pour Grade) is a pourable & self leveling material used for sealing of horizontaljoints only

AquaArm 2C-P is a two component cementitious coating system for waterproofing of wet areas and any waterretaining structures such as swimming pools and water features.It conforms to Class II requirement as per AS/NZS 4858

MYK Arment make Water repellent coating
It is also use as Wall & Floor Coating on concrete sealer.

FloArm Coat APB forms a tough, clear seal for block paving, concrete floors and paving slabs.

AquaArm Tank Coat is a two-component epoxy resin based waterproofing compound. One part is consisting of epoxyresin and the other part of hardener. After mixing both the parts, it can be thinned down with water of pre-determinedquantity. It possesses all the attributes of normal solvent based epoxy compositions, such as excellent water and chemicalresistance, adhesion, hardness, toughness sand mechanical strength. One of the major advantages of AquaArm TankCoat over solvent based epoxy is that it can be applied on damp surfaces also. Being free from solvents, it does not poseany health hazard to the applicators. AquaArm Tank Coat-less economical to apply

AquaArm Power Prufe 800 is a 3 layer pre-applied HDPE Membrane, composed of one thick HDPE backing layer, an aggressive pressure sensitive adhesive and trafficable weather resistant protective granular coating. AquaArm Power Prufe 800 provides a firm bonding to poured concrete, which prevents water ingress or migration. Confirms for basement grades 2,3 & 4 to BS 8102:2009. Confirms for basement grades 2,3 & 4 to IS 16471: 2017. Complies BRE 211 guidelines. Confirms for basement grades 2,3 & 4 to BS 8102:2009. Confirms for basement grades 2,3 & 4 to IS 16471: 2017. Complies BRE 211 guidelines. Confirms for basement grades 2,3 & 4 to BS 8102:2009. Confirms for basement grades 2,3 & 4 to IS 16471: 2017. Complies BRE 211 guidelines.

ElastoStretch is a high performance elastomeric roof coating designed to be used along with Zycosil+. It is highly UV durable and has a service life of up to 5 years. It features the ability to bridge cracks up to 1.5 mm. In combination with Zycosil+, ElastoStretch provides a waterproofing system that is a combination of a penetrative barrier with a seamless topcoat resulting in superior performance.

CICO NO.1 is yellow coloured viscous liquid based on reactive additives and micro particles suspension with anti corrosive properties. This is used as an Integral Cement Waterproofing Compound for Cement Concrete and Mortar.

M/S fOSROC construction make Cementitious Waterproof Coating 
Product Name -Hydroproof extra

Sikalastic®-450 (I) is a single component, elastomeric, aliphatic polyurethane basedcold liquid applied , high build, waterproof coating system. It cures to form an elastic,seamless, waterproof coating with good crack bridging properties