Construction Chemicals Corporation

Two component epoxy resin based waterproofing compound. One part is consisting of epoxy resin and the other part with curing agent. After mixing both the parts it can be thinned down with water. It possesses all the attributes of normal solvent based epoxy compositions such as excellent water and chemical resistance, adhesion, hardness, toughness and mechanical strength. One of the major advantage of Techoxy-3over solvent based epoxy is that it can be applied on damp surface also. Being free from solvents, it does not pose any health hazard to the applicator. Techoxy-3 is completely, consentient & economical to apply.FEATURES / ADVANTAGES  Water dilutable  Being water based it penetrates in concrete/plaster surface seals the porosity and network of finecracks. Reduces water permeability. After curing it forms hard, tough and strong film. Bonds strongly on cement concrete/mortar, plaster, asbestos sheet etc. surface. Excellent resistance to water, salt water, dilute acids, alkalies, soap water, and other chemicals. Excellent resistance to positive (hydrostatic) water pressure.APPLICATION Cement-concrete water storage tanks. Damp walls (interior / Exterior ) As  primer before painting (interior / Exterior ) As an undercoat before applying Techoat 61-p &Tar-o-Thane on roof terrace and internal walls. Toilet and kitchen walls. Coating on walls of breweries & food processing industries. As a primer before application of Techsterile-sterile coating in food & drug industries. As a putty with OPC-white cement to fill the fine cracks of external walls Hatcheries & Aqua farms.

Choksey Chemicals - PU Based, Waterproof, Highly Elastomeric, Excellent Bond, Non Toxic coating for Waterproofing of Terrace, Roof, Podium, Foundations

AquaArm Kool Roof Primer are used for absorbing andsanding surfaces such as gypsum construction material(screeds, planks, tiles), asbestos cement, concrete andmasonry, with hardening and moisture stemmingproperties. It also serves as bonding bridge for surfacesealant (such as COMBIFLEX and SANIFLEX), plasticscreed and colors (like ADICOR) and tile adhesives likeASOFIX, MONOFLEX or UNIFIX.

AquaArm 1K is a rigidcementitiousacrylic basedwaterproofingcoating.AquaArm 1Kis made of acrylic polymer, quartz sand, Portlandcement and additives. It does notcontain any material, which may cause negativeeffects onreinforcement or concrete.AquaArm 1Khardens to a rigid impervious layer.

Acrylic Waterproof Coating is emulsion based multipurpose liquid. It can be used as bonding agent, waterproofing and for polymer modified repair mortar.

Other Details:

• AcryBond Strong

Single Component, Waterproof, Elastomeric, UV Stable,Water based Acrlylic coating for Waterproofing of Terrace / Roof / Parapet Wall / Chajja / Roof Sheets. 
Color stainer can be mixed to make different color shades

M/s Choksey Chemicals Economical ,100% Acrylic Polymer ,42% High Solid Content ,Strong Boding agent ,Repair of RCC/Screed

M/S CHOKSEY CHEMICALS CEMENTITIOUS NON SHRINK FREE FLOW GROUT
PRODUCT NAME -MASTER GROUT CNS 50
Application Areas - Machine foundations , bearing plates ,boiler foundations ,columns in Precast constructions.

MYK Arment Armgrout NS 50 make Non Shrink Grout.


ArmGrout NS 50 is free flow, Non-Shrink, high strength expansive grout for thickness of 100mm. It can with stands static load and dynamic load. It is based on portland cement, graded aggregates and additives. The special additives used impart controlled expansion in the plastic state. The low W/C ratio ensures high Early and Final Compressive Strength. The flow characteristic of the grout fills the voids between the base plate and the concrete foundations completely and permanently. It effectively transfers all operational loads to the foundation.

Elastomeric, UV Resistant, Decorative Waterproof coating for External walls

FloArm Coat APB is a non degrading, film forming liquid based on an acrylic modified polymers. Once applied it forms a tough, clear seal which will resist oil and fuel spills, fungal growth and protect against weather damage. It stabilizes the sand within the joints of the block pavers to resist washout

SikaTop®-107 Seal IN is a two part, acrylic polymer modified cementitious liquid applied waterproofing coating system. It comprises of a liquid polymer and a cement based mix incorporating special admixtures. It is applied to concrete and mortar to prevent water infiltration.

MCON MORTAR is a pre-packed cementitious tileadhesive mainly consists of high-strength cements,selected silicon/quartz mineral charges and specificadditives. It is a tile adhesive for the permanent fixingof ceramic tiles on floor.

Advantages :

• Prepacked factory controlled ensures consistent quality
• Excellent waterproofing characteristics. 
• Gives sufficient time to set the tiles. 
• Good slip resistance & Spreads quickly and easily

Areas of Application:

• Floor Tile
• Bathroom Floor Tile
• Office Floor Tile 
• Kitchen Floor Tile

AquaArm TopGuard is a cementitious, polymer based Waterproof, Eastomeric, flexible coating used for Waterproofing of Toilet, Bathroom, Dry Balcony, Water Tank.   
It is two-component Solvent free and resistant to water, moisture and abrasion.

AcryBond Super Strong is acrylic emulsion basedmultipurpose liquid. It can be used as bonding agent,waterproofing and for polymer modified repair mortar.

Areas of Application• As a bonding agent for old and new concrete/mortar• Waterproofing of toilets, sunken slab and terrace• Making polymer modified repair mortars• Water resistant plasters Features and Benefits• Excellent bonding agent between old concrete and new concrete• Exhibits good waterproofing characteristics  • Can be used for internal as well as external use

ShaliCem® EWP is ready to use two component UV resistant coating, based on cement withcarefully graded aggregates in combination with selected admixtures and synthetic resins.ShaliCem® EWP is highly recommended to waterproof concrete.ShaliCem® EWP AR is ready to use two component UV resistant coating with Anti-root properties.ShaliCem® EWP AR is primarily used for in waterproofing of landscaping area

TECHFORCE 2K STRONG is a two component modified acrylic polymer based cementitious waterproof coating system, which on mixing and hardening provides an excellent water resistant barrier. It offers excellent resistance to both positive and negative water pressures.

TAPECRETE is an acrylic based Polymer modified cementitious compositecoating system. 

USES
Polymer in conjunction with cement provides properties to combat the shortcomings of cement particularly its poor adhesion properties,low impact strength, low flexural strength and thin section fragility. 

TAPECRETE Polymer adds to the potential use as well as enhances the properties of cement mortar making them excellent choice for use in new as well as renovation work. 

Zydex Make Waterproof & Water Repellent Coating
Easy to Apply ,Breathable & UV Resistant,protects against Algae & Fungal Growth

M.s Fosroc Make Fast Setting Cement 
Product Name -Renderoc Plug
Packing size  15 Kg
Renderoc Plug is supplied as a ready to use blend of drypowders which requires only the site addition of clean waterto produce a highly consistent, rapid setting mortar which iseasy to apply in many difficult conditions. The material isbased on a blend of cements, graded aggregates, specialfillers and chemical additives which control the rate of setand minimise the risk of thermal cracking.

Dr. Fixit Torchshield Primer is a solvent based bitumen modified primer conforming to ASTM D/41, to be used to seal and prepare the substrate prior to the installation of the Dr. Fixit Torchshield torch-on and Dr. Fixit Samshield, self adhesive membranes. In addition to that, it also acts as a binder for the dust particles which gets accumulated on the concrete surface even after cleaning.

Brand-MYK Arment Pvt.Ltd. 
AquaArm SBS 3000X -SBS Membrane 
Size -1 M X 20 Mtr

ReArm Bond 4031 is a multipurpose, structuralepoxy adhesive typically used for
Expansion Joint Tape
Fixing dowels and starter bars.
Blow hole filling
Levelling undulated surfaces
Fixing surface injection packers minherb STAMINA PLUS Sworon Bhosam With

Acrylic Polymer Caoting for sunken slab ,swimming pools ,water tank ,sewers channels & other repairing work and rain beating exterior walls

M/s Chowgule Constructions SBR Based chemical for Repairing and Waterproofing

AquaArm Powerprufe 800
Size - 1M X 20 Mtr x 1.2 mm Thk.

Single Component Acrylic Based water tightening & bonding agent
Product Name -AquaArm Tufcrete