Construction Chemicals Corporation

ArmGrout ADD is a single component powder Grout additive which is added to cement to produce a free-flow non-shrink expansive grout additive

ShaliGrout® 73 is a non-shrink high flow grout specially designed for use where high strength and high fluidity is required. It is formulated as a natural aggregate system with a shrinkage- compensating binder and is highly flow-able without sacrificing strength or performance capabilities. ShaliGrout® 73 is formulated to provide consistency and exacting performance in critical grouting operations. This also can be used as a repair product in various types of application in the project.

Single Component Free Flow Non-shrink High Strength Grout.
• Heavy duty grouting of machinery and equipment.• Bridge Seats• Structural columns• Bending plates• Crane rails• Anchorages

Low Viscosity High Strength Injectable Epoxy Grout
CICO POXY 21 LV is a two component solvent free, low viscosity, Free flowing, and normal curing epoxy resin system designed specially for pressure injection intoconcrete for carrying out structural repairs.
Due to its low viscosity it can be injected in to extremely fine cracks also. The cured resin possesses high mechanical strength, excellent adhesion, practically no shrinkage and a chemical resistance typical of all epoxy resin system. Fine cracks and small voids can be successfully sealed with CICO POXY 21 LV. Although CICO POXY 21 LV has very high strength, the cured material is not brittle and remains slightly flexible. CICO POXY 21 LV is supplied in premeasured quantities as component A-Resin and Component B Hardener 

MYK Arment Make ArmGrout HF is polyester based two component resin system specially made to give excellent anchorage .ArmGrout HFcan be used to an anchor size of 25mm Diameter into concrete, rock, masonry or brick work where high speed ofinstallation and early application of load is required.

STP Make Single component Injection/pressure/Morar/Concrete  

Dosage - 1% by weight of cement

weberprim Epox 501 is a transparent, two-component epoxy primer with excellent surface wetting and penetrating properties.

• Waterproofing
 
• Easy to use
 
• Submerged conditions
 
• Heavy duty applications
 
• No shrinkage & leakage
 
• High durability

ArmGrout M-50 is recommended for precision grouting where it is essential to with stand static load and typical applications like base plates of turbine, Generators, compressors, boilers

AquaArm SPU SPL is single component moisture-cured high polymerized polyurethane based, bitumen free waterproofcoating.
It can react with the moisture in the air and forms a non-toxic and highly elastomeric waterproof coating.